5 installation and site requirements, Installation and site requirements – FOCUS Enhancements FS-2 User Manual
Page 25
FS-2/2E Studio DTE Disk Recorder User Guide
5
1.5 Installation and Site Requirements
Focus Enhancements recommends that FS-2/2E units be installed in a restricted
access area, such as an equipment room or closet and the installation be performed
by trained installers.
The units are designed and tested to operate reliably between +5 - +40C (41 - 104 F).
To maintain this range, consider the following:
• Air temperature surrounding the equipment must remain within the specified
range.
• Air flow around the equipment must be sufficient to maintain proper
operating temperatures
If in doubt about the site temperature, take measurements to be certain. If
measured temperatures fall outside the defined ambient temperature range, you
must bring the temperature within the defined range.
Storage temperature for the units must remain between -20 - +60C (-4 - 140 F).