FieldServer Metasys N2 FS-8700-19 - Manual (Page 39)

FS-8700-19_Metasys_N2 Driver Manual Page 39 of 51
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]
Optimal start / stop module
Relative Item Signal Condition Read/Write Johnson Tag Description
0 Byte Write OSOPT Module options
1 Word Write OSZT@ Zone temperature connection
2 Word Write OSOT@ Outdoor temperature connection
3 Word Write OSSP@ Zone temperature setpoint connection
4 Word Write OSOB@ Off setpoint bias connection
5 Word Write OSDI@ Disable module connection
6 Word Write OSDA@ Disable adaptive action connection
7 Word Write OSTS@ Connection at time schedule output
8 Word Write OSNX@ Connection at next output
9 Word Write OSTIM@ Connection at time to next output
10 FP Write OSPURGE Minimum cool / heat time (min)
11 FP Write OSMAXST Maximum start up time (min)
12 FP Write OSMAXSO Maximum shut down time (min)
13 FP Write OSBHK Start mode building heating factor
14 FP Write OSBCK Start mode building cooling factor
15 FP Write OSSBHK Stop mode building heating factor
16 FP Write OSSBCK Stop mode building cooling factor
17 FP Write OSFW Percentage adaptive control (filter weight)
18 FP Write OSHTD Outdoor heating design temperature
19 FP Write OSCTD Outdoor cooling design temperature
20 FP Write OSCRNG Control range
21 FP Write OSSP Zone temperature on setpoint
22 FP Write OSOB Zone temperature off setpoint
23 FP Write OSTIM Remaining time to next event
24 Byte Write OSSTA Operating status