FUJITSU ServerView Suite V6.10 - Manual (Page 86)

5 User Interface
User Authentication
Login user ID and password for access control.
This parameters are only required if the ServerView update agent on the
managed node is configured with AccountCheck.
If the server is to be updated via a TFTP server, enter user ID and pass-
word for access to the hardware (Management Blade, Connection Blade,
iRMC S3 firmware / BIOS on a system running a VMware ESXi operating
system).
check and set Password
Checks the logon data and sets the access rights on the selected servers
(if Manageable = yes). The password is valid for the current session.
If the server is unavailable, the logon data is stored under the assumption
that it is correct (if Manageable = no).
Remove Server from List
Removes the selected server from the displayed list.
86 ServerView Update Management