Reviewing the c16 boot up sequence – FARGO electronic C16 User Manual
Page 9

RESTRICTED USE ONLY
FARGO Electronic, Inc.
Persona C16 Card Printer Service Manual (Rev. 5.0)
ix
Reviewing the C16 Boot up Sequence
Step Process
1
On Power up, the Printer checks the current state of the Card Feed Sensor and
the Headlift Sensor.
2
If the Headlift Sensor is found to be open, the Headlift Motor will turn until a
closed state is seen.
3
If the Card Feed Sensor is found to be blocked, the Card Feed Stepper will
engage to eject the card.