FARGO electronic C16 - Manual (Page 6)

RESTRICTED USE ONLY FARGO Electronic, Inc.
Persona C16 Card Printer Service Manual (Rev. 5.0) vi
Reviewing the C16 Sequence of Operations
The following sequence describes a full color print job with magnetic encoding.
Step Process
1 The File information is received from the PC
2 The Printer checks the installed Ribbon type stored in memory against the Ribbon
type command that was sent from the Printer.
a. If Ribbon type does not match, the media light will begin flashing.
3 The Card input Motor and print Stepper Motor engage.
4 The Card feed Sensor detects leading edge of card and disengages the card input
Motor.
Continued on the next page
Printhead
Card Cleaning Roller
Power Button
and LED
Media Button
and LED
Release Tab
Top Cover