Freescale Semiconductor Target Interface MMDS0508 - Manual (Page 80)

App en dix
MMDS Commands
A–80 MMDS0508 Target Interface
ROM 3E00..FDFF ROM
IO FE00..FE1F PRU or TOP TOP board resource or the PRU
NONE FE20..FFDB NONE
ROM FFDC..FFFE ROM
COP FFFF..FFFF special ram for cop
RT MEM 0.. 3FF (disabled)
-------------------------------------------------------
OSC
A.1.6.7 Short Description
selects Emulator Clock Frequency command.
A.1.6.8 Syntax
OSC
[rate | source]
A.1.6.9 Description
The OSC command selects the emulator clock frequency: one of five internally
generated frequencies (16 Mhz, 8 Mhz, 4 Mhz, 2 Mhz, or 1 Mhz), or an external clock
source. The firmware sets the default emulator clock rate, adapting it to the current
frequency.
Entering this command without parameters opens the corresponding dialog box.
OSC [ rate | source ]
where rate is: OSC1MHZ Selects the 1 Mhz oscillator.
OSC2MHZ Selects the 2 Mhz oscillator.
OSC4MHZ Selects the 4 Mhz oscillator.
OSC8MHZ Selects the 8 Mhz oscillator.
OSC16MHZ Selects the 16 Mhz oscillator.
Where source is: EXT Selects an external clock source.
Freescale Semiconductor, Inc.
For More Information: www.freescale.com