Freescale Semiconductor Target Interface MMDS0508 - Manual (Page 31)

MMDS Target Comp onent
4.8 MMDS0508 Menu Entries
4–31 MMDS0508 Target Interface
4.8.1.2 Maximum Baud Rate
The maximum baud rate depends on the speed and interrupt load of the host computer.
For slow
book computers, or for computers running in a network, the maximum baud rate may
be as low as 19200. A buffered I/O card may allow the maximum rate of 115200 for
any host computer. The default value is 9600.
4.8.1.3 Show Protocol
If you check the Show Protocol checkbox, the system reports all commands and
responses in the command line window.
NOTE Motorola or Hiware support personnel use this feature.
4.8.2 Memory Configuration
To view the memory layout, choose MMDS0508 > Memory Map... This opens the
Memory Configuration dialog box shown in
Figure 4.11 .
Freescale Semiconductor, Inc.
For More Information: www.freescale.com