Freescale Semiconductor Target Interface MMDS0508 - Manual (Page 57)

MMDS Target Comp onent
4.10 Bus Analyzer
4–57 MMDS0508 Target Interface
4.10.6 Dumping the Bus analyzer data to a file
To dump the Bus analyzer data to a file, choose the Trace>Dump... menu selection.
This opens the Dump Bus Analyzer Frames dialog box as shown in
Figure 4.30 .
Figure 4.30 Dump Bus Analyzer Frames
4.10.6.1 Dump File
This dialog box lets you specify frames in the bus analyzer window, then dump those
frames to a file.
In the Dump File edit box, enter the name of the file that will receive the dumped
frames.
4.10.6.1.1 Select
Click the Select button to open a standard file-select dialog box. You can use this
dialog box to specify the filename value for the Dump File edit box.
4.10.6.1.2 Frames to Dump
Use this area’s edit boxes to define the range of frames to be dumped to the file.
4.10.6.1.3 All
To have the analyzer dump all frames of the range, select the All option button.
4.10.6.1.4 Instructions
To have the analyzer dump only frames in which an instruction starts (that is, an
instruction also in the defined range), select the Instructions option button.
The trace dialog box display only frame as shown in Figure 4.31 .
Freescale Semiconductor, Inc.
For More Information: www.freescale.com