Furuno FS-5070 - Manual (Page 73)

5. ROUTINE MESSAGE CALLING, RECEVING
5-13
MSG TYPE : GROUP MESSAGE
COMM FREQ
COMM MODE : TELEPHONE
PRIORITY : ROUTINE
GROUP ID : 012345678
DSC FREQ : 2M-INTL
GO TO ALL VIEW
CHANNEL
FREQUENCY
GO TO VIEW
Compose msg.
8. Rotate the ENTER knob to choose communication frequency desired and then push the
ENTER knob. (See page 5-3 for details.) NO INFO lets other party choose
communication frequency.
9. Push the ENTER knob to open the DSC FREQ menu.
GO TO VIEW
MSG TYPE
GROUP ID
PRIORITY
COMM MODE
COMM FREQ
: Individual
: 001234567
: Routine
: Telephone
: No infor
MESSAGE
E
ONE
DSC FREQ
: 12M-INTL
6 MHZ
8 MHZ
12 MHZ
4 MHZ
2 MHZ
16 MHZ
18 MHZ
22 MHZ
25 MHZ
Rotate the ENTER
knob to select.
Compose msg.
10. Rotate the ENTER knob to choose DSC band desired and then push the ENTER knob
to open the DSC FREQ menu.
11. Rotate the ENTER knob to choose DSC frequency desired and then push the ENTER
knob. (See “How to Set DSC Frequency” on page 5-4 for details.)
MSG TYPE : GROUP MESSAGE
COMM FREQ : 2164.0 kHz
COMM MODE : TELEPHONE
PRIORITY : ROUTINE
GROUP ID : 012345678
DSC FREQ : 2M-INTL
GO TO VIEW
Compose msg.
12. Press the CALL key to send the group call (transmission time: about seven seconds).
The display shows “Group message in progress!” while the call is being sent.
SENDER ID : 012345678
Group
message in progress!
TIME TO GO : 6S
DSC FREQ : 2177.0 kHz
TELEPHONE
PRIORITY : ROUTINE
2164.0 kHz
13. Press the CANCEL key twice to show the radiotelephone screen after the call is sent.
14. If you selected TELEPHONE at step 7, communicate by radiotelephone. For NBDP, do
the following: