Furuno FS-5070 - Manual (Page 130)

7. NBDP SYSTEM OVERVIEW
7-8
Function key [F3]: Operate menu
The Operate menu mainly controls transmitting and receiving.
1: Call Station
3: File to Send
4: Cancel Sending
5: Scan (Start/Stop)
6: Manual Reception
7: Timer Operation
8: Manual Calling
9: Set Frequency
Operate
2: Macro Operation
Operate menu
1: Call Station
Chooses a station from the station list.
2: Macro Operation Enables macro operation. For details, see paragraph 10.10.
3: File to Send Selects a file (to transmit).
4: Cancel Sending Stops sending a file.
5: Scan Start/Stop Starts/stops frequency scanning.
6: Manual Reception Selects communication mode for reception; AUTO, ARQ, FEC
DIRC.
7: Timer Operation Timer programming.
8: Manual Calling Sets TX mode and subscriber’s ID number in manual calling.
9: Set Frequency Sets TX and RX frequencies in manual calling.