Furuno FS-5070 - Manual (Page 108)

6. MENU OPERATION
6-10
11. Rotate the ENTER knob to choose appropriate DSC band and then push the ENTER
knob.
12. Choose appropriate DSC frequency and then push the ENTER knob.
13. Follow “How to Enter File Name and Number” on page 6-6 to enter file name and
number.
6.5.4 Preparing test call
1. Press the #/SETUP key.
2. Rotate the ENTER knob to choose MESSAGE and then push the ENTER knob.
3. Push the ENTER knob to open the MSG TYPE menu.
* Message file entry
MSG TYPE
STATION ID
COMM MODE
COMM FREQ
DSC FREQ
: INDIVIDUAL
: ---------
: TELEPHONE
: NO INFO
: 2M-INTL
INDIVIDUAL
PSTN MESSAGE
TEST MESSAGE
GROUP MESSAGE
4. Rotate the ENTER knob to choose TEST MESSAGE and then push the ENTER knob.
5. Push the ENTER knob to open the STATION ID entry window.
* Message file entry
MSG TYPE
DSC FREQ : 2187.5 KHZ
: TEST
STATION ID 000000000
6. Enter station ID where to send the test message and then push the ENTER knob.
7. Push
the ENTER knob to open the DSC FREQ menu.
DSC FREQ KHZ
* Message file entry
MSG TYPE
STATION ID
: Test
: 001234567
: Safety
: kHz
VIEW
4207.5
6312.0
8414.5
12577.0
16804.5 2187.5
8. Rotate the ENTER knob to choose appropriate DSC frequency and then push the
ENTER knob.
9. Follow “How to Enter File Name and Number” on page 6-6 to enter file name and
number.