Furuno FS-5070 - Manual (Page 37)

3. DSC OVERVIEW
3-5
Individual receive call
* Received message *
View message
MAR-11-2006-23:59
INDIVIDUAL REQUEST
SENDER ID: 123456789
PRIORITY: ROUTINE TX: 2222.2 kHz
RX: 2222.2 kHz
TELEPHONE
10M10S
COMM FREQUENCY TX: 2222.2 kHz
RX: 2222.2 kHz
ACKNOWLEDGEMENT REQUIRED
ERROR-CHECK: OK
BACK TO RECEIVED VIEW
Date and time of message
ID No. of sending station
Priority (Routine, Safety, Urgency)
Working frequency to use
Error check (OK or NG)
DSC frequency used
Working frequency to use
Note: ANSWER is for replying to message.
INDIVIDUAL REQUEST
DESTINATION ID
: 111111111
PRIORITY : ROUTINE
SENDER-ID : 123456789
COMMUNICATION MODE: TELEPHONE
COMM OPTION
: NO INFORMATION
View message
Format (individual)
ID No. of your station
Priority (Routine, Safety, Urgency)
ID No. of sending station
Push ENTER knob
to switch.
Rotate ENTER knob to switch.
DSC FREQUENCY TX: 2177.0KHZ
RX: 2177.0KHZ
ANSWER GO TO VIEW
PREV
NEXT
Communication type
Message type (or the reason when
the message is not received)
Communication type
Communication option
3.4.2 Send calls
Below are sample distress and individual send calls. The content of other types of send
calls is similar to that of the individual call.
Distress send call
Distress button
pressed!
KEEP PRESSED FOR 2S
NATURE: UNDESIGNATED
POS: 12 ° 34.0000N
123 ° 45.0000E AT 12:34
TELEPHONE 2182.0 kHz
DSC FREQ : 2187.5 kHz
Seconds to continue pressing the DISTRESS button
to transmit the distress alert.
Nature of Distress (Undesignated, Fire, Flooding,
Collision, Grounding, Listing, Sinking, Disabled,
Abandoning, Piracy, Man Overboard)
Position of ship in distress (your ship)
DSC frequency to send distress call
Working frequency to use and communication type