Fuji Bikes FRENIC 5000G11S/P11S - Manual (Page 42)

4-10
4-3-10 Load rate measurement
On the "Program menu" screen, select "6. Load Rate Measurement". On the "Load rate measurement"
screen, the maximum current, average current, and average breaking power during the set measuring time
are measured and displayed.
Display returns to initial values.
Maximum current
Average current
Average breaking power
(Motor rated output/100%)
60.00
60.00
RUN
PRG ⇒PRG MENU
F/D ⇒LED SHIFT
60.00 60.00
Measuring time
60.00
T=600s
Imax=0.00A
Iave= 0.00A
BPave= 0.0%
Change measuring using
and and .
60.00
5.MAINTENANC
⇒6.LOAD FCTR
T=360s
Imax=0.00A
Iave=0.00A
BPave= 0.0%
FUNC
DATA
1.DATA SETTING
2.DATA CHECK
3.OPR MNTR
4.I/O CHECK
PRG
FWD
T=3600s
Imax=56.4A
Iave=23.5A
BPave= 10.4%
T=150s
Imax=0.00A
Iave=0.00A
BPave= 0.0%
Displays the remaining
measuring time, when
reaches zero, ends the
measurement.
FUNC
DATA
Start measuring Set measuring time
∨ ∧
>>