Adding a new cue point to the cue point list – Fostex PD606 User Manual
Page 98
98
Location Recorder Model PD606
Chapter 5: Recording/Playback
• Deleting a cue point
To delete an unnecessary cue point, select “
press the [ENTER/YES] key (“Sure?” flashes).
Adding a new cue point to the cue point list
While the CUE LIST screen is shown, you can add a new cue point to the list.
Select a desired cue number which does not hold data.
By pressing the [ENTER/YES] key, time data of the current recorder position is set as
the cue point.
In the example below, Cue 05 is set when the current recorder position is “01h 58m
20s **f **sf” (LTC time).
To exit the CUE LIST screen, press the [EXIT] key.
To exit the CUE LIST screen, press the [EXIT] key.
Press the [ENTER/YES] key again to delete the cue point from the list.
The display returns to the home screen
After deleting a cue point, the label column of the cue point becomes
empty while the time value column shows “--h --m --s --f --sf”.
flashing
flashing