Fostex PD606 - Manual (Page 23)

23
Location Recorder Model PD606
Chapter 2: Preparation before using the PD606
The ENDURA battery is mounted to the bottom of the PD606.
There are two mounts for mounting the batteries. If you use the non-PowerLink type
batteries, you can mount one battery for each base. If you use the PowerLink type
batteries, you can mount up to four batteries (two batteries for each base).
: When you mount or replace the battery, make sure that the unit power is off.
By sudden power failure, memory data may be reset or the unit may be damaged be-
cause the unit handles data while the power is on. However, note that, if you set two
batteries, you can replace a battery which is not currently active.
Mounting the battery
Battery mount 2 (BATT2)
Battery mount 1 (BATT1)
ENDURA battery ENDURA battery
: If you use the IDX ENDURA battery, read the operation manual supplied with
the battery and handle it correctly. The PD606 does not provide battery charge func-
tion. Charge the IDX ENDURA battery correctly according to the battery manual.
Connectors