Using save and cancel in the menu interface, Using save and cancel in the menu interface -9, Using – HP 2600 User Manual
Page 97
Switch Memory and Configuration
Using the Menu and Web Browser Interfaces To Implement Configuration Changes
N o t e
The only exception to this operation are two VLAN-related parameter changes
that require a reboot—described under “Rebooting To Activate Configuration
Changes” on page 6-11.
Using
Save
and
Cancel
in the Menu Interface
For any configuration screen in the menu interface, the Save command:
1. Implements the changes in the running-config file.
2. Saves your changes to the startup-config file.
If you decide not to save and implement the changes in the screen, select
Cancel to discard them and continue switch operation with the current oper
ation. For example, suppose you have made the changes shown below in the
System Information screen:
To save and
implement the
changes for all
parameters in this
screen, press the
[Enter]
key, then
press
[S]
(for Save).
To cancel all
changes, press the
[Enter]
key, then
press
[C]
(for Cancel)
Figure 6-4. Example of Pending Configuration Changes that Can Be Saved or
Cancelled
6-9