HP 2600 - Manual (Page 157)

Time Protocols
TimeP: Viewing, Selecting, and Configuring
Menu: Viewing and Configuring TimeP
To View, Enable, and Modify the TimeP Protocol:
1. From the Main Menu, select:
2. Switch Configuration...
1. System Information
Time Protocol Selection Parameter
– TIMEP (the default)
– SNTP
– None
Figure 9-9. The System Information Screen (Default Values)
2. Press [E] (for Edit ). The cursor moves to the System Name field.
3. Use
[v] to move the cursor to the
Time Sync Method field.
4. If TIMEP is not already selected, use the Space bar to select TIMEP , then
press
[v] once to display and move to the
TimeP Mode field.
5. Do one of the following:
• Use the Space bar to select the DHCP mode, then press
[v] to move
the cursor to the Poll Interval field, and go to step 6.
9-15