Disabling the sntp mode – HP 2600 User Manual
Page 155
Time Protocols
SNTP: Viewing, Selecting, and Configuring
Figure 9-7. Example of SNTP with Time Sychronization Disabled
Disabling the SNTP Mode.
If you want to prevent SNTP from being used
even if selected by
timesync
(or the Menu interface’s
Time Sync Method
param
eter), configure the SNTP mode as disabled.
Syntax:
no sntp
Disables SNTP by changing the SNTP mode
configuration to
Disabled
.
For example, if the switch is running SNTP in Unicast mode with an SNTP
server at 10.28.227.141 and a server version of 3 (the default),
no sntp
changes
the SNTP configuration as shown below, and disables time synchronization
on the switch.
Even though the Time Sync Mode is set to Sntp,
time synchronization is disabled because no
sntp has disabled the SNTP Mode parameter.
Figure 9-8. Example of Disabling Time Synchronization by Disabling the SNTP Mode
9-13