To copy show tech output to a text file – HP 2600 User Manual
Page 390

Troubleshooting
Diagnostic Tools
Listing Switch Configuration and Operation Details for Help
in Troubleshooting
Release G.04.05 and greater includes the
show tech
command. This command
outputs, in a single listing, switch operating and running configuration details
from several internal switch sources, including:
■
Image stamp (software version data)
■
Running configuration
■
Event Log listing
■
Boot History
■
Port settings
■
Status and counters — port status
■
IP routes
■
Status and counters — VLAN information
■
GVRP support
■
Load balancing (trunk and LACP)
■
Stacking status — this switch
■
Stacking status — all
Syntax:
show tech
Executing
show tech
outputs a data listing to your terminal emulator. However,
using your terminal emulator’s text capture features, you can also save
show
tech
data to a text file for viewing, printing, or sending to an associate. For
example, if your terminal emulator is the Hyperterminal application available
with Microsoft® Windows® software, you can copy the show tech output to
a file and then use either Microsoft Word or Notepad to display the data. (In
this case, Microsoft Word provides the data in an easier-to-read format.)
To Copy show tech output to a Text File.
This example uses the
Microsoft Windows terminal emulator. To use another terminal emulator
application, refer to the documentation provided with that application.
C-40