HP 2600 - Manual (Page 222)

Power Over Ethernet (PoE) Operation for the Series 2600-PWR Switches
PoE Operating Notes
PoE Operating Notes
■ Simply disabling a PoE port does not affect power delivery through
that port. To cycle the power on a PD receiving power from a PoE
port on the switch, disable, then re-enable the power to that port. For
example, to cycle the power on a PoE device connected to port 1 on
a 2600-PWR switch:
HPswitch(config)# no interface 1 power
HPswitch(config)# interface 1 power
11-16