Cli access for mac address views and searches – HP 2600 User Manual
Page 336

Monitoring and Analyzing Switch Operation
Status and Counters Data
Prompt for Selecting
the Port To Search
Figure B-10. Listing MAC Addresses for a Specific Port
2. Use the Space bar to select the port you want to list or search for MAC
addresses, then press
[Enter]
to list the MAC addresses detected on that
port.
Determining Whether a Specific Device Is Connected to the Selected
Port.
Proceeding from step 2, above:
1. Press
[S]
(for
Search), to display the following prompt:
Enter MAC address: _
2. Type the MAC address you want to locate and press
[Enter]
. The address is
highlighted if found. If the switch does not find the address, it leaves the
MAC address listing empty.
3. Press
[P]
(for
Prev page) to return to the previous per-port listing.
CLI Access for MAC Address Views and Searches
Syntax:
show mac-address
[vlan < vlan-id >]
[ethernet]< port-list >]
[< mac-addr >]
To List All Learned MAC Addresses on the Switch, with The Port
Number on Which Each MAC Address Was Learned.
HPswitch> show mac-address
To List All Learned MAC Addresses on one or more ports, with Their
B-16