Overview, Overview -3 – HP 2600 User Manual
Page 169

Port Status and Basic Configuration
Overview
Overview
This chapter describes how to view the current port configuration and how
to configure ports to non-default settings, including
■
Enable/Disable
■
Mode (speed and duplex)
■
Flow Control
■
Broadcast Limit
■
Auto-MDIX
■
Jumbo Packets on the Series 2800 Switches
■
QoS Pass-Through Mode for Series 2800 Switches
■
Configuring Port-Based Priority for Incoming Packets on the 4100gl and
6108 Switches
■
Using Friendly (Optional) Port Names
Viewing Port Status and Configuring Port
Parameters
Port Status and Configuration Features
Feature
Default
Menu
CLI
Web
viewing port status
n/a
configuring ports
See Table 10-1
on pages 10-4
and 10-5.
Note On Connecting
If the switch either fails to show a link between an installed transceiver and
Transceivers to
another device, or demonstrates errors or other unexpected behavior on the
Fixed-Configuration
link, check the port configuration on both devices for a speed and/or duplex
Devices
(mode) mismatch. To check the mode setting for a port on the switch, use
either the Port Status screen in the menu interface (page 10-6) or
show
interfaces brief in the CLI (page 10-7).
10-3