Using hp pcm+ to update switch software – HP 2600 User Manual
Page 312
File Transfers
Downloading Switch Software
If you do not specify either a primary or secondary flash location for the
destination, the download automatically goes to primary flash.
For example, to download switch software from secondary flash in a switch
with an IP address of 10.28.227.103 to the secondary flash in the destination
switch, you would execute the following command in the destination switch’s
CLI:
Figure A-6. Switch-to-Switch, from Either Flash in Source to Either Flash in
Destination
Using HP PCM+ to Update Switch Software
HP ProCurve Manager Plus include a software update utility for updating on
HP ProCurve switch products. For further information, refer to the Getting
Started Guide
and the Administrator’s Guide, provided electronically with
the application.
A-16