HP 2600 User Manual
Page 346
Monitoring and Analyzing Switch Operation
Port and Static Trunk Monitoring Features
Move the cursor to the Monitoring Port parameter.
Port where monitored traffic exits the switch.
Figure B-20. How To Select a Monitoring Port
5. Use the Space bar to select the port to use for monitoring.
6. Use the downarrow key to move the cursor to the
Action column for the
individual ports and position the cursor at a port you want to monitor.
7. Press the Space bar to select
Monitor for each port and trunk that you want
monitored. (Use the downarrow key to move from one interface to the
next in the
Action column.)
8. When you finish selecting ports to monitor, press
[Enter]
, then press
[S]
(for
Save) to save your changes and exit from the screen.
9. Return to the Main Menu.
B-26