Using the menu to configure ports – HP 2600 User Manual
Page 173
Port Status and Basic Configuration
Viewing Port Status and Configuring Port Parameters
Using the Menu To Configure Ports.
N o t e
The menu interface uses the same screen for configuring both individual ports
and port trunk groups. For information on port trunk groups, see Chapter 12,
“Port Trunking” .
1. From the Main Menu, Select:
2. Switch Configuration...
2. Port/Trunk Settings
Figure 10-2. Example of Port/Trunk Settings with a Trunk Group Configured
2. Press
[E]
(for
Edit). The cursor moves to the Enabled field for the first port.
3. Refer to the online help provided with this screen for further information
on configuration options for these features.
4. When you have finished making changes to the above parameters, press
[Enter]
, then press
[S]
(for
Save).
CLI: Viewing Port Status and Configuring Port
Parameters
Port Status and Configuration Commands
show interfaces brief
below
show interfaces config
interface
10-7