Marantz AV8003 - Manual (Page 90)

CONNECTIONS
SETUP
BASIC
OPERA
TION
ADV
ANCED
OPERA
TION
TROUBLESHOOTING
OTHERS
NAMES AND
FUNCTION
REMOTE
CONTROLLER
87
ENGLISH
LCD (LCD setting)
Press the button next to the “LCD” indicator in the
SYS.SETUP menu screen in the LCD.
The LCD setting menu is displayed.
• LCD TIMER (LCD timer setting)
This sets the time that the LCD remains on, after a
button is pressed on the RC2001.
When there are no operations and the LCD is
turned off, this setting enables power consumption
to be reduced and the life of the battery pack to be
extended.
The default setting is 10 seconds.
1. The LCD setting menu is displayed, and so
press the button next to “LCD TIMER” in the
LCD display.
2. Press the buttons (right: +, left: -) displayed
next to TIME to set the display time. The time
can be set in 1-second intervals from 10 to 60
seconds.
To leave the LCD always on, press the button
next to the “ALWAYS ON’ indicator. However,
please note that this setting will shorten the life
of the battery pack.
After deciding the settings, press the ENTER
button.
3. The message “COMPLETED” is displayed on
the LCD to indicate that the display time setting
is completed.
• Either press the ENTER button or wait three
seconds for the LCD to automatically return
to the SYS.SETUP menu.
• Pressing the Home button returns the LCD
to the MAIN MENU.
Note:
If the LCD is turned off by the LCD timer, pressing
any of the buttons on the remote controller will turn
it on again. When the LCD is turned on, the pressed
command is not activated.
To execute a command operation, press the button
while the LCD is on.
• CONTRAST
(LCD CONTRAST ADJUSTMENT)
This enables the LCD contrast to be adjusted.
Adjust for maximum visibility according to your
viewing environment.
1. The LCD setting menu is displayed, and so
press the buttons next to “CONTRAST” in the
LCD display.
2. Press the side buttons (right: +, left: -) to adjust
the contrast level.
After deciding the settings, press the ENTER
button.
The message “COMPLETED” is displayed
on the LCD to indicate that the setting is
completed.
• Either press the ENTER button or wait three
seconds for the LCD to automatically return
to the SYS.SETUP menu.
• Pressing the Home button returns the LCD
to the MAIN MENU.
BEEP (Beep sound setting)
This sets the built-in beep sound in the RC2001.
1. Press the button next to the “BEEP” indicator
in the SYS.SETUP menu screen in the LCD to
display the beep setting screen.
2. Press the button next to the “ENABLE” or
“DISABLE” indicators on the LCD to either
enable or disable the beep sound.
3. Either press the ENTER button or wait three
seconds so that “ENABLE” or “DISABLE” is
displayed on the LCD and the settings are
automatically completed.
• Either press the ENTER button or wait three
seconds for the LCD to automatically return
to the SYS. SETUP menu.
• Pressing the Home button returns the LCD
to the MAIN MENU.
AV8003_U_Eng.indb 87 AV8003_U_Eng.indb 87 08.4.28 10:40:44 AM 08.4.28 10:40:44 AM