Zone system – Marantz AV8003 User Manual

Page 69

CONNECTIONS

SETUP

BASIC

OPERA

TION

REMOTE

CONTROLLER

TROUBLESHOOTING

OTHERS

NAMES AND

FUNCTION

ADV

ANCED

OPERA

TION

ENGLISH

ZONE SYSTEM

The Zone System mode allows the same source or
different sources to be heard in two ZONEs other
than where this unit is installed.

To use the zone system, connect the audio from the
ZONE OUT A and B AUDIO output terminals to the
ZONE A and B amps.

Connect the VIDEO output (ZONE OUT) terminal to
the monitor in Zone A.
(ZONE OUT terminal is linked to the source selector
in Zone A.)

If a surround channel back speaker or speaker C
(see page 19) are not used in the ZONE where this
unit is installed, the zone speaker system can be
used with the amp for the surround back channel.

Also, the COMPONENT VIDEO MONITOR OUT
2 terminal can be used for the monitor output of
ZONE A.

This unit supports zone system functions such as
source selectors, OSD menu systems, sleep timers
and remote control.

ZONE PLAYBACK USING THE ZONE OUT
TERMINALS

TOP

ZONE

SPEAKER

DISPLAY

INPUT

7.1CH

DIRECT

PURE

PHONES

THX

M-DAX

MODE

SURROUND

CLEAR

MEMORY

T-MODE

BAND

EXIT

ZONE

DOWN

VOLUME

INPUT

SELECTOR

AUTO

SETUP MIC

HDMI

M-DAX

PURE DIRECT

POWER ON/OFF

STANDBY

AV PRE TUNER AV8003

ENTER

Pressing

the

ZONE button on the unit one time

accesses the ZONE A settings. Pressing it two
times accesses the ZONE B settings. Then,
pressing it a third time turns the zone feature
off.

When the ZONE setting mode is engaged, one

of the following screens appears on the display
for 10 seconds.

* Display when ZONE A is selected

Z A D V D - 1 8 d B

* Display when ZONE B is selected

Z B D V D - 1 8 d B

Select an input source with the INPUT

SELECTOR knob.

Turn

the

VOLUME knob to set the volume of

the ZONE used in the zone system as you
like.

Note:

• The sleep timer, monaural output and other features

can also be set using the MAIN MENU.

(See page 36)

ZONE PLAYBACK USING THE SURROUND
BACK PREOUT TERMINALS

This unit allows you to connect another set of power
amp and place them in a different ZONE or separated
area for Iistening to music.

TOP

ZONE

SPEAKER

DISPLAY

INPUT

7.1CH

DIRECT

PURE

PHONES

THX

M-DAX

MODE

SURROUND

CLEAR

MEMORY

T-MODE

BAND

EXIT

ZONE

DOWN

VOLUME

INPUT

SELECTOR

AUTO

SETUP MIC

HDMI

M-DAX

PURE DIRECT

POWER ON/OFF

STANDBY

AV PRE TUNER AV8003

ENTER

Pressing

the

ZONE SPEAKER button on the

unit one time accesses the ZONE SPEAKER
A settings. Pressing it two times accesses the
ZONE SPEAKER B settings. Then, pressing it
a third time turns the ZONE SPEAKER feature
off.

When the ZONE SPEAKER setting mode is

engaged, one of the following screens appears
on the display for 10 seconds.

* Display when ZONE SPEAKER A is selected

Z S A D V D - 1 8 d B

* Display when ZONE SPEAKER B is selected

Z S B D V D - 1 8 d B

Select an input source with the INPUT

SELECTOR knob.

Turn

the

VOLUME knob to set the volume of

the ZONE used in the zone system as you
like.

Note:

• The sleep timer, monaural output and other features

can also be set using the MAIN MENU. (See page
36.)

Notes for Zone Speaker

• The Zone Speaker mode can be set for only one of

the ZONEs, A or B.

• The ZONE SPEAKER output can be used when

Surround Back Speaker = “NONE, ZSP A or ZSP
B” in the SPEAKER SETUP menu. (See SPEAKER
SETUP, page 30)

• “The Surr. Back Speakers are in use” is displayed

when the ZONE SPEAKER button is pressed when
the Surround Back Speaker is not set to “NONE,
ZSP A or ZSP B” in the SPEAKER SETUP menu.
(See SPEAKER SETUP, page 30)

• The Zonespeaker mode cannot be used at the same

time as the speaker C. When connecting for zone
use, set the SPEAKER C selector switch on the rear
panel to OFF.

• When the unit is put in ZONE SPEAKER mode and

ZSP A or ZSP B has been set as the Surround Back
Speaker (P.30), the ZONE SPEAKER function can
be turned on automatically simply by pressing the
SOURCE button.

AV8003_U_Eng.indb 66

08.4.28 10:40:35 AM