Marantz AV8003 User Manual

Page 47

CONNECTIONS

SETUP

ADV

ANCED

OPERA

TION

REMOTE

CONTROLLER

TROUBLESHOOTING

OTHERS

NAMES AND

FUNCTION

BASIC

OPERA

TION

ENGLISH

STEREO

This mode bypasses all surround processing.
In stereo program sources, the left and right channels
play normally when PCM audio or analog stereo is
input.
With Dolby Digital and DTS sources, the 5.1 channels
are converted to two channel stereo. 96 kHz PCM
source material can be played back in stereo mode.

Dolby Virtual Speaker

Dolby Virtual Speaker technology uses proprietary
technology of Dolby Laboratories to create a virtual
surround sound fi eld using only two speakers for the
front channels, allowing the user to experience sound
as if surround speakers were actually being used.

MULTI CH. (MOVIE, MUSIC)

This mode is used to create a wider, deeper and more
natural soundstage from two channel source material.
This is done by feeding the left channel signal to
both the left front and left surround speakers and the
right channel signal to both the right front and right
surround speakers. Additionally, the center channel
reproduces a mix of the right and left channels.

Note:

• Audio is not output from the CENTER channel

when using MULTI CH. MUSIC mode.

THX CINEMA

THX Cinema mode applies additional processing
to Dolby Digital, DTS and Dolby Pro Logic multi-
channel, surround sources. The THX processing
was developed by THX Ltd. to recreate the sound of
top-quality theater.
Use the THX Cinema mode for all movies on disc,
tape or broadcast. In this mode, the THX Surround
EX mode is not available.

THX SURROUND EX

In a movie theater, fi lm soundtracks that have been
encoded with Dolby Digital Surround EX technology
are able to reproduce an extra channel which has
been added during the mixing of the program.
This channel, called Surround Back, places sounds
behind the listener in addition to the currently
available front left, front center, front right, surround
right, surround left and subwoofer channels.
This additional channel provides the opportunity
for more detailed imaging behind the listener and
brings more depth, spacious ambience and sound
localization than ever before.

THX Surround EX will operate for any 5.1 channel
source whenever THX is active.
THX Surround EX is not available in system without
surround back speaker(s).

Note:

• When playing Dolby Digital Surround EX-encoded

software in 6.1 channels, it is required to select the
THX Surround EX mode.

THX ULTRA2 CINEMA

THX ULTRA2 Cinema mode plays 5.1 movies using
all 7.1 speakers giving you the best possible movie
watching experience. In this mode, ASA processing
blends the surround L/R speakers and surround back
speakers, providing the optimal mix of ambient and
directional surround sound.
This mode permits the playback of a non Surround
EX/ES-encoded 5.1 movie over a 7.1 system.
DTS-ES (Matrix and 6.1 Discrete) and Dolby
Digital Surround EX-encoded soundtracks will be
automatically detected, if the appropriate fl ag has
been encoded.
Some Dolby Digital Surround EX soundtracks
are missing the digital fl ag that allows automatic
switching.
If you know that the movie that you are watching is
encoded in Surround EX, you can manually select the
THX Surround EX playback mode, otherwise the THX
ULTRA2 Cinema mode will apply ASA processing to
provide optimum replay.

THX MUSIC

For the replay of multichannel music, the THX Music
mode should be selected. In this mode, THX ASA
processing is applied to the surround channels of all
5.1-encoded music sources, such as DTS and Dolby
Digital, to provide a wide, stable, rear soundstage.
This mode is to be used with multichannel music
sources such as DTS 5.1 music and Dolby Digital
5.1 music.

Notes:

• These modes are only available when you have

setup SPEAKER SIZE menu system (i.e. 2 surround
back speakers).

• These modes are only available when the input

signal has surround left and surround right contents.

THX GAMES

For the replay of stereo and multichannel game
audio the THX Games mode should be selected.
In this mode, THX ASA processing is applied to
the surround channels of all 5.1 and 2.0-encoded
game sources such as analog, PCM, DTS and
Dolby Digital. This accurately places all game audio
surround information, providing a full 360-degree
playback environment. THX Games mode is unique
as it gives you a smooth transition of audio in all
points of the surround fi eld.

Neural Surround

Neural Surround

represents the latest advancement

in surround technology developed for music.
Neural Surround

employs psychoacoustic

frequency domain processing which allows delivery
of a more detailed sound stage with superior channel
separation and localization of audio elements.
System playback is scalable from 5.1 to 7.1 multi-
channel surround playback.

CAUTION

Note for DTS

• To connected DVD player, laserdisc player or CD

player needs to support DTS digital output. You
may not be able to play some DTS source signals
from certain CD players and LD players even if
you connect the player to the unit digitally. This is
because the digital signal has been processed
(such as the output level, sampling frequency or
frequency response), and the unit cannot recognize
the signal as DTS data.

• Depending on the player used, DTS play may

produce a short noise. This is not a malfunction.

• While signals from a DTS laserdisc or CD are

playing in another surround mode, you cannot
switch to digital input or from digital input to analog
input from the INPUT SETUP in the MAIN MENU
or by pressing the A/D button.

• You can not listen to DTS-encoded software in a

ZONE.

• The outputs for VCR 1 OUT, DSS/VCR 2 OUT,

TAPE OUT and CD-R OUT output analog audio
signals only. Do not record from CDs or LDs that
support DTS using these outputs. If you do, the
DTS-encoded signal will be recorded as noise.

Note or Dolby Digital Surround EX

• When playing Dolby Digital Surround EX-encoded

software in 6.1 channels, it is required to set the
EX/ES mode.

• Note that some Dolby Digital Surround EX-encoded

software does not contain the identifi cation signal.
In this case, set the EX/ES mode manually.

Note for 96 kHz/192 kHz PCM audio

• The AUTO, Pure Direct, and Stereo modes can be

used when playing PCM signals with a sampling
frequency of 96/192 kHz (such as from DVD-Video/
Audio discs).

• Certain DVD player models inhibit digital output. For

details, refer to the player’s operation manual.

• Some DVD discs feature copy protection. When using

such disc, 96 kHz PCM signal are not output from the
DVD player. For details, refer to the player’s operation
manual.

Note for HDCD

• HDCD is effective only through digital input.

• You may not be able to play some HDCD source

signals from certain CD players if you connect the
player to the unit digitally. This is because the digital
signal has been processed (such as the output level,
sampling frequency or frequency response) and the
unit cannot recognize the signal as HDCD data.

AV8003_U_Eng.indb 44

08.4.28 10:40:22 AM