Adept s350 Cobra - Manual (Page 63)

Chapter 6: Optional Equipment Installation
6.4 Camera Mounting
A camera can be mounted on the Cobra s350 by installing a user-supplied camera bracket. The
bracket is installed on the underside of the robot—see the following figure for the location and
dimensions of the mounting holes. See Figure 6-7 and Figure 6-8 for drawings of the brackets.
The user must fabricate this bracket, it is not available from Adept.
An optional camera channel (40861-00830) and camera mounting block (40861-00660) are
available from Adept. These can be attached to the user-supplied camera bracket. See the
following figure.
4x M3 x 0.5
82
30
(66)
Camera
Channel
Camera
Mounting
Block
Camera
Bracket
Figure 6-6. Camera Mounting Details
Adept Cobra s350 User's Guide, Rev. D
Page 63 of 94