Lingenfelter L460260704 Lingenfelter CAN to Analog Gauge & Relay Output Module CAN2 v1.0 - Manual (Page 6)

CAN2-002 Install & Operating Instructions 6
© 2014 Lingenfelter Performance Engineering
1.1 CAN2-002 Description
The CAN2-002 module converts vehicle CAN data, including GMLAN and J1939 data, to analog outputs.
It is capable of providing up to four (4) outputs per module and multiple modules can be used one the
same vehicle. The module allows you to control gauges and other devices without having to duplicate
sensors already installed on the vehicle. These outputs can be used to control analog gauges or - via
relays - fans, warning lights, reverse lights or other devices looking for an analog activation signal.
For some vehicle applications the CAN2-002 module can also be purchased pre-configured for your
vehicle application. Contact LPE with your vehicle details for more information. In order to configure the
CAN2-002 module for your vehicle, we will need the following information:
Make and model number for each gauge (if the gauges are aftermarket gauges)
Year, make and model of vehicle (if we are connecting to the OEM gauges)
Type of ECM and software being used to control the engine (year, make and model it came from or
Operating System information from the ECM).
The CAN2-002 module is currently configured to passively listen for existing data being transmitted on
the CAN network. It does not currently offer the option to actively request data so if a variable you are
interested in is not being broadcast on the CAN bus then the CAN2-002 module will not be able to
display that information. Contact LPE or your LPE dealer if you have a variable that you need displayed
that is not available. An alternate variable may exist or we may be able to enable that data transmission
in your ECM.
The CAN2 software has been tested for use with Windows XP, Windows 7 and Windows 8 (32 bit and 64
bit versions).