Lingenfelter L460260704 Lingenfelter CAN to Analog Gauge & Relay Output Module CAN2 v1.0 - Manual (Page 28)

CAN2-002 Install & Operating Instructions 28
© 2014 Lingenfelter Performance Engineering
2.9 Wire Routing
Route the wiring to the device(s). Make sure the wiring is secured and out of the way of moving parts and
extreme heat sources.
Avoid placing the CAN2-002 module or any of the wiring near potential sources of electrical noise
including line lock solenoids, trans-brake solenoids, nitrous or fuel solenoids, fuel injectors and coils. Do
not route the CAN wires along side high voltage wires. If they must cross each other, have them cross
and 90 degree angles to each other.