Industrial Data Systems IDS DT200 - Manual (Page 43)

DT 200 Users Manual version 1.E Diagnostic Tests
39
Parameter 91 Serial Port 3 Mode (4 [8 data bits, no parity])
Enter the mode number from the table below to select the mode parameter in the mode
description column.
Mode Number Mode Description
1 7 data bits, no parity
2 7 data bits, even parity
3 7 data bits, odd parity
4 8 data bits, no parity
5 8 data bits, even parity
6 8 data bits, odd parity
Parameter 92 Serial Port 3 Baud Rate (1 [9600 baud])
Enter a baud number from the table below to select a baud rate from the description
column. (*HS baud rates for the 100 samples per sec version only).
Baud Number Baud Description
1 9600 Baud
2 4800 Baud
3 2400 Baud
4 1200 Baud
5 600 Baud
6 300 Baud
7 19200 Baud
Parameter 93 Serial Port 3 Format
Enter the indicator number from the table below to select a weight indicator.
Indicator no. Indicator Model
1 Condec
2 AND
3 Cardinal 738
4 OHAUS
5 Toledo 8142