Festo Электромотор MTR-DCI - Manual (Page 207)

A. Technical appendix
A-3
Festo P.BE-MTR-DCI-DN-EN en 1209a
A.1 Technical data
General information
Protection class to EN 60529 IP54 (plug connectors plugged in or fitted with protective
cap)
Relative humidity 0 to 95 %, non-condensing
Temperature range Operation: 0 ... +50 °C
Storage/transport: -25 ... +60 °C
Vibration and shock
– Vibration tested in accordance with DIN/IEC 68/EN 60068 parts 2-6;
0.15 mm path at 10 ... 58 Hz;
2 g acceleration at 58 ... 150 Hz
– Shock tested in accordance with DIN/IEC 68/EN 60068
parts 2-27;
±15 g at 11 ms duration;
5 shocks in each direction
– Shock resistance Tested in accordance with DIN/IEC 68/EN 60068
parts 2-29,
±15 g at 6 ms duration;
1000 shocks in each direction
Protection against electric shock 1) Protection by a PELV power unit against direct and indirect
contact as per IEC/DIN EN 60204-1
(Protected Extra-Low Voltage)
Electromagnetic compatibility (EMC) 2) See declaration of conformity (www.festo.com)
Gearing type Planetary gearing
Encoder (with 4x evaluation) MTR-DCI-32: 300 x4 —> 1200 Increments/Revolution
MTR-DCI-42, 52, 62: 500 x4 —> 2000 Increments/Revol-
ution
Temperature monitoring Warning message at 70 °C < T < 80 °C
Shut-down at temperature ≥ 80 °C
Display resolution 128 x 64 pixels
1) The device is intended for industrial use.
2) The maximum permitted I/O signal cable length is 30 metres.