Lantronix XPORT PROTM 900-560 - Manual (Page 65)

8: Configurable Pin Manager
XPort Pro User Guide 65
To enable or disable a CP group:
1. Select CPM > Groups.
2. Select the Group name in the table representing the group you wish to enable. The Group
Status information for this group appears in a table below.
3. Click Enable to enable, as appropriate.
4. Click Disable to disable, as appropriate.
To set a CP group’s value:
1. Create a custom group and add a CP to it.
2. Select CPM > Groups.
3. Select the custom group from the current configuration table.
4. Enter a Group Status Value.
5. Click Set.
To remove a CP from a Group:
1. Select CPM > Groups.
2. Select a the group in the Group Name column that contains the CP to be removed.
3. Select the CP from the drop-down list beside the Remove button.
4. Click Remove.