Lantronix XPORT PROTM 900-560 - Manual (Page 61)

8: Configurable Pin Manager
XPort Pro User Guide 61
2. Select a CP number (CP column) in the Current Configuration table to display the status of
that pin. The CP Status table shows the information about the CP.
Table 8-3 CPM CPs Status
Note: To modify a CP, all groups in which it is a member must be disabled.
To change a CP output value:
1. Select the CP number (in CP column) from the current configuration table.
2. Enter the CP value in the CP Status table.
3. Click Set. The changed CP value appears in the current configuration table.
To change a CP configuration:
1. Select the CP number (in CP column) from the current configuration table.
2. Select the CP configuration from the Type drop-down list in the CP Status table.
Ref Indicates the hardware pin number associated with the CP.
Configured As Shows the CP configuration. A CP configured as Input is set to read
input. A CP configured as Output drives data out of the device.
Value Indicates the current status of the CP:
 1 = asserted
 0 = de-asserted
 Inv = the CP logic is inverted
Groups Indicates the number of groups in which the CP is a member.
Active In Group Shows the group in which the CP is active. A CP can be a member of
several groups. However, it may only be active in one group.
CPM – CPs Status Description
Name Shows the CP number.
State Shows the current enable state of the CP.
Type Indicates whether the CP is set for input or output.
Value Shows the last bit in the CP current value.
Bit Visual display of the 32 bit placeholders for a CP.
Level A “+” symbol indicates the CP is asserted (the voltage is high).
A “-“indicates the CP voltage is low.
I/O Indicates the current status of the pin:
 I = input
 O = output
 = unassigned
Logic An “I” indicates the CP is inverted.
Binary Shows the assertion value of the corresponding bit.
CP# Shows the CP number.
Groups Lists the groups in which the CP is a member.
CPM – CPs Current
Configuration Description