Terminal and host settings, Terminal settings, Line terminal configuration – Lantronix XPORT PROTM 900-560 User Manual
Page 55: Figure 7-1 terminal on line configuration, Chapter 7: terminal and host settings
XPort Pro User Guide
55
7:
Terminal and Host Settings
This chapter describes how to view and configure the Terminal Login Connect Menu and
associated Host configuration. It contains the following sections:
The Terminal Login Connect Menu feature allows the XPort Pro device to present a menu of
predefined connections when the device is accessed via telnet, ssh, or a serial port. From the
menu, a user can choose one of the presented options and the device automatically makes the
predefined connection.
The Terminal page controls whether a Telnet, SSH, or serial port connection presents the CLI or
the Login Connect Menu. By default, the CLI is presented when the device is accessed. When
configured to present the Login Connect Menu, the hosts configured via the Hosts page, and
named serial lines are presented.
Terminal Settings
This page shows configuration settings for each terminal connection method. You can configure
whether each serial line or the telnet/SSH server presents a CLI or a Login Connect menu when a
connection is made.
Line Terminal Configuration
To configure a specific line to support an attached terminal:
1.
Select Terminal on the menu bar. The Terminal web page appears.
2.
Select the line number at the top of the page connected to the terminal you want to configure.
The default is Line 1.
Figure 7-1 Terminal on Line Configuration
3.
Enter or modify the following settings: