Arp settings, To configure the arp network protocol, Table 12-11 arp settings – Lantronix XPORT PROTM 900-560 User Manual
Page 110
12: Maintenance and Diagnostics Settings
XPort Pro User Guide
110
ARP Settings
To configure the ARP network protocol:
1.
Select Protocol Stack on the menu bar.
2.
Select ARP.
Figure 12-10 ARP Protocol Page
3.
Modify the following settings:
Table 12-11
ARP Settings
Protocol Stack
ARP Settings
Description
ARP Timeout
This is the maximum duration an address remains in the cache.
Enter the time, in
hours
,
minutes
and
seconds
.
IP Address
Enter the IP address to add to the ARP cache.