Lantronix XPORT PROTM 900-560 - Manual (Page 136)

13: Advanced Settings
XPort Pro User Guide 136
1. Enter or modify the following settings.
Figure 13-14 XML: Import Configuration from Filesystem
2. Click Import.
Import Configuration from
Filesystem Settings Description
Filename Enter the name of the file on the device (local to its filesystem) that contains
XCR data.
Lines to Import Select the lines or network whose settings you want to import. Click the
Select All link to select all the serial lines and the network lines. Click the
Clear All link to clear all of the checkboxes. By default, all line instances
are selected.
Only the selected line instances will be imported in the line, LPD, PPP,
tunnel, and terminal groups.
Whole Groups to Import Select the configuration groups to import from the XML configuration
record. This option imports all instances of each selected group unless it is
one of the Lines to Import.
Note: By default, all groups are checked except those pertaining to the
network configuration; this is so that import will not break your network
connectivity.
You may check or uncheck any group to include or omit that group from
import. To import all of the groups, click the Select All but Networking link
to import all groups. To clear all the checkboxes, click the Clear All link.
Text List Enter a string to import specific instances of a group. The textual format of
this string is:
:;:;...
Each group name is followed by a colon and the instance value and
each : value is separated by a semi-colon. If a group has no
instance, then specify the group name only.
Use this option for groups other than those affected by Lines to Import.