B1.3 ipm-ata-cf, Figure b1.3 ipm-ata-cf board layout, Table b1.3 ipm-ata-cf jumper description – Inova High Performance CPU board ICP-PII User Manual
Page 79: Compactpci, Ipm-ata, Appendix b
©2001 Inova Computers GmbH
Page B-5
CPU Appendix-B
Appendix B
IPM-ATA
CompactPCI
®
B
B1.3 IPM-ATA-CF
The IPM-ATA-CF has provision for one or two standard Compact FLASH or MicroDrive devices.
Figure B1.3 illustrates the significant connectors for this device while Table B1.3 indicates the
jumper settings for the various Master/Slave device configurations.
Figure B1.3 IPM-ATA-CF Board Layout
1
2
3
Table B1.3 IPM-ATA-CF Jumper Description
It should be noted that the secondary IDE channel only is available for use by the IPB-ATA-CF (the
primary is on the CPU board itself). A Master device must be present either in the form of an
external hard-disk, Compact FLASH, MicroDrive or CD-ROM etc. Slave only configurations and
multi Master configurations are not supported and will not work!
Master
Slave
Master
Slave
X
-
2-3
X
-
2-3
-
X
Open
-
X
Open
-
-
-
-
-
-
Jumper J6
Compact FLASH
or MicroDrive in J3
Compact FLASH
or MicroDrive in J4
Jumper J7