FUJITSU C-4120 User Manual

Page 85

T r o u b l e s h o o t i n g

L i f e B o o k C S e r i e s f r o m F u j i t s u

Problem

Possible Cause

Possible Solution

Five

You turn on your notebook and nothing

5. There is no battery installed and there is no

5. Use the Status Indicator panel to verify the

seems to happen (continued).

Power adapter (AC or auto/airline) installed.

presence and condition of the battery.
(See Figures 3-1 and 3-2 on pages 20-21.)
Install a Power adapter. If the battery is
not charged use a Power adapter until it
is charged.

6. The battery is installed but is faulty

6. Use the Status Indicator panel to verify

and there is no Power adapter (AC or auto/

the presence and condition of the battery.

airline) installed.

(See Figures 3-1 and 3-2 on pages 20-21.) If
a battery is indicating a short, remove that
battery and operate from another power
source or replace that battery.

7. The battery is low.

7. If the battery is dead there will be a beep

when the power is turned on and the
notebook will immediately go into Critical
Low Battery Suspend mode. (See pages 25-26.)
Check the Status Indicator panel to deter-
mine the presence and condition of the
battery. (See Figures 3-1 and 3-2 on
pages 20-21.) Use a Power adapter to
operate until a battery is charged or install
a charged battery.