FUJITSU C-4120 User Manual

Page 83

T r o u b l e s h o o t i n g

L i f e B o o k C S e r i e s f r o m F u j i t s u

Problem

Possible Cause

Possible Solution

Five

Power Failures

You turn on your notebook and

1. The installed battery is completely

1. When the battery is dead there will be a

nothing seems to happen.

discharged, and there is no Power

beep when the power is turned on and the

adapter (AC or auto/airline) installed.

notebook will immediately go into Critical
Low Battery Suspend mode. (See pages
25-26.) Check the Status Indicator panel to
determine the presence and condition of
the battery. (See pages 20-21.) Install the
battery if it is not installed or a Power
adapter if all batteries are dead or
unavailable. (See pages 12 and 48-49.)

2. The battery is installed but is

2. When the battery is dead there will be a

completely discharged and the Power

beep when the power is turned on and the

adapter (AC or auto/airline) is not

notebook will immediately go into Critical

plugged in properly.

Low Battery Suspend mode. (See pages 25-
26.) Check the Status Indicator panel to
determine the presence and condition of the
battery and adapter. (See Figures 3-1 and
3-2 on pages 20-21.) Verify that your adapter
is connected correctly. (See page 12.)