FUJITSU C-4120 User Manual

Page 78

S e c t i o n F i v e

Problem

Possible Cause

Possible Solution

Floppy Disk Drive Problems

You cannot access your floppy disk.

1. You tried to write to a write protected

1. Eject the floppy disk and set it to write

floppy disk.

enabled. (See page 31.)

2. Floppy disk is not loaded correctly.

2. Eject floppy disk, check orientation and

re-insert. (See Floppy Disk Drive
on pages 30-31.)

3. BIOS setup utility has

Diskette

3. Revise the setup utility Main menu settings.

Controller: Disabled.

(See Main Menu in the BIOS guide. See page
44 for more information.)

4. Security is set to protect access to floppy

4. Verify your password and security settings.

disk data (shows as 5 1/4 (A:).)

Security should have Diskette Access: All.

Hard Drive Problems

You can not access your hard drive.

1. The setup utility is set to something other

1. Revise BIOS settings to set both Primary

than the characteristics of your internal

Master and Primary Slave correctly.

hard drive.

(See Main Menu and Primary Master
Submenu in the BIOS guide. See page
44 for more information.)