FUJITSU C-4120 - Manual (Page 59)

Thr
ee
U s i n g Y o u r L i f e B o o k C S e r i e s
L i f e B o o k C S e r i e s f r o m F u j i t s u
45
PHDISK allows you to perform five different
functions related to the Save-to-Disk space on
your internal hard drive. They are:
1. Allocate a space for the Save-to-Disk function.
2. Remove all space allocation for the
Save-to-Disk function.
3. Find out details about the hard drive and the
current Save-to-Disk space allocation.
4. Re-allocate space and mark bad blocks in the
space allocated to the Save-to-Disk function
when a disk error has occurred.
5. Find out how much space is needed to
perform the Save-to-Disk function with
the current memory configuration and how
much unused space is available on the
internal hard drive.
To find out how much space is needed to per-
form the Save-to-Disk function with the cur-
rent memory configuration and how much
unused space is available on the internal hard
drive, do the following:
1. Click on Start.
2. Click on Shut Down
3. From the Shut Down menu select the
restart option.
4. When the Fujitsu Logo appears on your
screen press F8 immediately, before the
Windows 98 banner appears on the screen.
5. Select 6. Safe mode command prompt only,
then press Enter.
6. At the c:\> prompt, type cd fujitsu ,
then press Enter.
7. At the c:\> fujitsu prompt, type
PHDISK. Press the Enter key.
8. The screen will display the amount disk
space needed to perform the Save-to-Disk
function with the current memory configu-
ration and how much space is being used by
the existing Save-to-Disk file.
The screen will display the amount disk space
needed to perform the Save-to-Disk function
with the current memory configuration and
how much unused space is available on the
internal hard drive.
To find out details about the hard drive and
the current Save-to-Disk space allocation, do
the following:
1. Click on Start.
2. Click on Shut Down
3. From the Shut Down menu select the
restart option.
4. When the Fujitsu Logo appears on your
screen press F8 immediately, before the
Windows 98 banner appears on the screen.
5. Select 6. Safe mode command prompt only,
then press Enter.
6. At the c:\> prompt, type cd fujitsu ,
Press the Enter key.
7. The screen will display the size of the space
currently allocated to the Save-to-Disk
function and other parameters about the
space and the hard drive.