Brother RJ-4040 - Manual (Page 34)

31
5
5
The software can be upgraded to the latest version using this tool.
The following is an example when using Windows Vista
®
. In the following steps, you will see XX-XXXX. Read
"XX" as your printer name.
Note
• To use the P-touch Update Software, it is necessary to install it from the CD-ROM provided.
You can also download from the Brother Solutions Center (http://solutions.brother.com)
• You must be connected to the internet in order to launch the P-touch Update Software.
• You may find that the software and the contents in this manual are different.
• Upon installation of the P-touch Update Software, an icon will be installed on your desktop for your
convenience.
• Do not turn off the power when transferring templates.
Updating P-touch Editor Software
5
a
Double-click [P-touch Update Software]
Note
• The following method can also be used to start the P-touch Update Software.
• Click the start button, and then select [All Programs] - [Brother P-touch] - [P-touch Update Software].
Updating P-touch Editor, Updating the
Firmware
5