Brother RJ-4040 - Manual (Page 57)

ESC/P Command Reference
- 51 -
5. Control Command Details
VT Perform vertical tab
ASCII: VT
Decimal: 11
Hexadecimal: 0B
Parameters
None
Description
 Moves the print position to the nearest vertical tab position down from the input position.
 The next horizontal print position becomes the beginning of the line.
 If the next vertical tab position extends beyond the bottom margin, or if there is no vertical tab position
specified below the current position, VT is performed as if it is (moves to the TOF position of the next
page).
1 2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
VT code
Tab position
Tab position
Tab position
17
18
ＡＢＣＤ
EfghijkL
Abcdefg
ABCDEFG
aiueo
VT code
VT code
Line feed
amount
Example: Vertical tabs are specified at Lines 6, 11, and 15, and
data is entered while VT are performed.
•
•
•
 When all vertical tab positions have been canceled by an initialization or with ESC B NUL, performing VT
is equal to performing CR.
 Auto-canceling double-width characters specified with SO or ESC SO are canceled.