Hitachi HCX5000I - Manual (Page 66)

C HAPTER 1: A BOUT Y OUR S ELEC S ET 500A M ESSAGING
HCXTD840, Issue 1, July 2001 1-55
The
key and MW
status The key indicates message lamp status only
when someone calls you. If you call a station, the
key does not indicate the status of the message
waiting lamp.
When there
are multiple
attendants In facilities with multiple attendant consoles, the
key on all attendants indicates the message lamp
status of calling stations.
Turning off
MW lamps-
limitations Pressing a lit key or dialing the callme
cancellation code only turns off message waiting lamps
turned on by the key on an attendant console.
Message waiting lamps can also be turned on through the
CommCenter or VMS (voice message system). When a
callme message is returned, it rings at both the and
keys. Press either key to answer the call.
Automatic
deletion of
callme message When a station returns a callme message, the message is
automatically deleted. SelecSet users can use the
soft key to delete callme messages without
returning them.
Return feature
access code for
non-SelecSets A station's message waiting lamp may have been activated
by someone other than the attendant text message center or
voice message system, for example. Therefore, users who
do not have SelecSets (with a soft key)
should use the return feature access code (usually #0) to
respond to their message lamps.