Alarm indications, Receiving a combined alarm – Hitachi HCX5000I User Manual
Page 121
A
LARM
I
NDICATIONS
S
ELEC
S
ET
500A U
SER
G
UIDE
2-50
HCXTD840, Issue 1, July 2001
Alarm Indications
Attendant
alarms
Your SelecSet 500A attendant console can receive various
alarms, depending on how the system is configured and
what keys you have programmed. This section describes
various alarms that may light lamps on your console and
the action you should take when you receive the alarm.
Receiving a Combined Alarm
Combined
alarms
This alarm conserves the number of keys that are assigned
to alarms. The
the system, PMS and VMS alarms (you can still have
these alarms programmed on separate keys) and answer
detection alarms.
The lamp associated with the
malfunction is detected in the system, the answer detection
link, the PMS/PMSHOBIC link, or the VMS link. The
CALM lamp stays lit until the problem is corrected.
CALM lamp
status
The CALM lamp indicates the status of the alarms:
Lamp Status
Meaning
Dark
No alarm conditions exist
Lit steadily
One alarm has occurred
Slow wink/flash
Two or three alarms have occurred
Fast wink/flash
All four alarms have occurred.