Hitachi HCX5000I - Manual (Page 168)

C HAPTER 2: A DDITIONAL O PERATIONS
L ABELING I NSTRUCTIONS
HCXTD840, Issue 1, July 2001 2-97
Labeling Instructions
Key labeling After you program your SelecSet, you should label your
keys. The fixed keys, hold loops and , and
keys are pre-labeled. Your SelecSet 500A also
comes with sheets of pre-printed and blank labels for use
on suggested and optional programmable keys such as
specific autodial numbers or trunk group answer keys.
Procedure To label your keys:
1 Insert the entire label sheet in a typewriter.
2 Type on the desired label.
3 When you finish labeling your SelecSet, keep the
sheet in case you reprogram your keys.
4 To verify that you have the proper key for the label,
press plus any programmable key. If the key
is programmed, the bottom line of the display shows
the key number plus the feature or autodial number
assigned to the key; if not, the key number plus
Autodial displays.
5 Press plus any soft key to return to the
normal display.
6 Remove the label and place it carefully on the key.