Hitachi HCX5000I - Manual (Page 147)

E XTENDING AN I NCOMING D ATA C ALL TO A S TATION S ELEC S ET 500A U SER G UIDE
2-76 HCXTD840, Issue 1, July 2001
Extending an Incoming Data Call to a Station
Using the
key You can extend a data call to a station by using the
(convert) key.
Procedure To extend a data call to a station (only older SelecSets
support data calling):
1 While talking on a voice call, press the key.
The call is placed in consultation hold. (Consultation
hold temporarily removes the party from the
connection so transfer or conference operations can
be performed.)
2 The CAP representing the held call winks slowly.
3 The and keys are steadily lit.
4 Dial the desired station number (you can dial your
own station number to extend a data call to yourself).
5 Press . The and keys go
dark. (If you are converting/transferring a data call to
yourself, the data lamp should be flashing. Press
to answer the call).
6 Press to disconnect.
7 To cancel a voice to data call conversion, press the
winking CAP before pressing .