Hitachi HCX5000I - Manual (Page 127)

R ECEIVING AN E911 A LARM S ELEC S ET 500A U SER G UIDE
2-56 HCXTD840, Issue 1, July 2001
Receiving an E911 Alarm
About E911
alarms When someone on the property calls 911, the E911 alarm
lamp flashes to alert you to an emergency. Depending on
how your phone system is set up, the visual alarm may be
accompanied by distinctive ringing, which is disabled
when you acknowledge the wakeup alarm.
Procedure To identify who placed a 911 call:
1 Press the key.
The display shows the number of the station that
made the call. If more than one 911 call was made, the
E911 lamp continues to flash.
2 Press the key until all 911 calls have been
displayed. When all 911 calls have been displayed,
the E911 lamp stops flashing.
Once you press the key to display a 911 call,
information about the originating station is erased
from the E911 alarm queue.
3 Press or lift your handset to clear the
display.